Andrews Products Grinds Its Cams Using a Computer With Cam Design Capabilities. This Superior Technology Gives the Utmost in Both Performance and Reliability. Only the Best Alloy Steel Billets and Heat-Treating Processes Are Used. The Power in a Harley Twin Cam Engine Is Completely Released Only When Superior Andrews Computer-Designed High-Performance Cams Are Installed. Cams Come With New Bearings (1 Roller and 1 Ball).
TW60A CHAIN DRIVEN CAMS
- Use With Low Restriction Exhaust (2,400-6,000+ Rpm)
- Fits All 1999-2006 Harley Davidson Twin Cam Models (Excludes 2006 FXD)
- Use With Hi-Lift Springs and Collars
- Made in the USA
- Sold as a Set
INTAKE- Open (In Degrees): 24
- Close (In Degrees): 56
- Duration at .053 (In Degrees): 260
- Duration at .020 (In Degrees): 296
- Valve Lift: .560
- Lift at TDC: .205
EXHAUST- Open (In Degrees): 58
- Close (In Degrees): 22
- Duration at .053 (In Degrees): 260
- Duration at .020 (In Degrees): 296
- Valve Lift: .560
- Lift at TDC: .192
- NOTE: 2000-2006 Model Cams Use a Splined Cam Drive Sprocket. These Cams Will Also Fit on 1999 Twin Cam Models ONLY if Either OEM P/N 25716-99 or Andrews P/N 288015 Splined Cam Drive Sprocket Is Used
- NOTE: It Is the Installer's Responsibility to Check Coil Bind and All Clearances
- NOTE: The Image Displayed Is Representative of Andrews Cams, but May Vary Depending on Your Specific Model.
- Make sure this fits
by entering your model number.
- Splined chain drive camshafts
- Kits include: cams, 1 roller bearing and 1 ball bearing (bearing only included in 1999-2006 models.
- Roller bearing can be purchased separately)
- Designed for use with stock for Harley-Davidson hydraulic lifters
- Can be installed on both carbureted and fuel injected models
