Andrews Products Grinds Its Cams With the Help of a Computer With Cam Design Capabilities. This Superior Technology Gives the Utmost in Both Performance and Reliability. Only the Best Alloy Steel Billets and Heat-Treating Processes Are Utilized. Furthermore, the Power in Harleys Evolution Engines Can Be Made Even More Convincing When a Superior Andrews Computer-Designed High-Performance Cam Is Installed. These Hydraulic Lifter Cams Are Capable of 6,000-Plus Rpm With Stock Springs and No Valve Float.
EV3 EVOLUTION CAM
Bolt-in Cam for Light Bikes (FXRS, Etc.) Adds Significant Mid-Range Power Without Affecting IdleA 6,000+ Rpm Cam for Stock Heads and Springs With Hydraulic LiftersFits All 1984-1999 Harley Davidson Evolution Big Twin Models (Excludes 1999 Twin Cams)Made in the USASold IndividuallyINTAKE
Open (In Degrees): 21Close (In Degrees): 37Duration at .053 (In Degrees): 238Duration at .020 (In Degrees): 280Valve Lift: .495Lift at TDC: .197EXHAUST
Open (In Degrees): 43Close (In Degrees): 15Duration at .053 (In Degrees): 238Duration at .020 (In Degrees): 280Valve Lift: .495Lift at TDC: .159NOTE: It Is the Installer's Responsibility to Check Coil Bind and All ClearancesNOTE: The Image Displayed Is Representative of Andrews Cams, but May Vary Depending on Your Specific Model.- Make sure this fits
by entering your model number.
- Measurement of cam and pinion gears is especially critical for 90 and later models to verify proper fit.
- Bolt-in performance for FXR type bikes
- This is a 6000+ RPM cam with stock heads, springs and hydraulic lifters
- Intake Opening (degrees): 21
- Intake Closing (degrees): 37
