You have a joint going bad on your vehicle because it overheated and caused the axle to seize in the hub. You try everything from penetrating lubricants, beating on it with a hammer, and using an air chisel, but nothing works.
It’s time to put away your unreliable tools and use this ABN Axle and Front Wheel Hub Puller, Flange Type, 3-3/4“ to 4-1/2“.
This ABN Axle and Front Wheel Hub Puller has a universal, flange type design for all vehicles with independent front wheel suspension. If your vehicle’s studs are inside (not outside or on) the drum (hub) and has a tapered axle and 4-6 lugs, the ABN Axle and Front Wheel Hub Puller will work perfectly.
Some hub pullers strip threads on the spindle, damage wheel bearings, and distort wheel lugs, and others have threaded bolts that are too short to attach to lugs, so you can’t pull past to remove the hub properly. Skip the frustration and use the ABN Axle and Front Wheel Hub Puller. This ABN tool removes wheel hubs mounted on tapered axles and press fit rear drum brakes by pushing on the end of a shaft. It won’t distort wheel lugs and will provide a straight pull. The bolt presses against the axle in order to pull the hub off, but if you look closely, you will see that it is tapered, so it won’t damage the axle.
The ABN Axle and Front Wheel Hub Puller, Flange Type, 3-3/4“ to 4-1/2“ is special designed to use on most models of domestic and imported vehicles – as long as the studs are inside the drum, this is the tool for you! Use the ABN Wheel Hub Puller to maintain brakes and bearing quickly and effectively on 4, 5, or 6 bolt stud design axles. This puller makes wheel-hub removal fast, simple, and damage-free.